Mulberry Wine Recipe #1
Makes 1 gallon
Ingredients
- 4 pounds mulberries
- 4 1/2 cups of sugar
- 1 teaspoon yeast nutrient
- 1 teaspoon acid blend
- 1 teaspoon pectic enzymes
- 1 Campden tablet
- Use all-purpose or Bordeaux yeast
Instructions
- Crush the fruit in the primary fermenter
- Pour in all the additives and sugar.
- Stir well and top up to 1 gallon with hot water.
- Let sit until cool and the Campden tablet dissipates (about 24 hours).
- Then add the yeast and start the ferment.
- Racking and finings as per normal.
Mulberry Wine Recipe #2 (with Honey)
Ingredients
- 3 pounds fresh mulberries
- 8 ounces light raisins, chopped
- 3 pounds honey
- 1 teaspoon pectic enzyme
- 1 teaspoon yeast nutrient
- 1 1/2 cups orange juice (for yeast starter)
- 1 Campden tablet
- 1 packet Champagne yeast
Instructions
- Boil the honey in two quarts of water for 10 to 15 minutes and skim off the foam.
- Mash the berries.
- Put them and the chopped raisins into the primary fermenter.
- When the boiled honey and water has cooled sufficiently so as not to endanger the fermenter (if it is glass, for instance) add it to the fruit.
- Crush the Campden tablet and stir it into the primary fermenter.
- Stir in the pectic enzyme.
- Allow the mixture to stand for 24 hours.
- Then make up the yeast starter by mixing the yeast and 1 teaspoon of yeast nutrient with the orange juice in a suitable bottle. The orange juice should be at about 80 degrees Fahrenheit.
- Shake the bottle well to mix it, then loosen the top. Be sure the top is loose!
- If you are making more than one gallon of wine, add one more teaspoon of yeast nutrient per gallon to the primary fermenter.
- Let the yeast starter stand for 1 to 2 hours until it is bubbly and then stir it into the primary fermenter.
- Stir the fermenting melomel 2 or 3 times a day for the first day or two, then once daily until the fermentation slows.
- When the primary fermentation is complete (usually in about a week if you used Champagne yeast, longer if you used a slower yeast), strain off the berries and discard them.
- Place the melomel into the secondary fermenter. If necessary make up the volume with water.Install the water seal.
- Rack as necessary. Bottle when it is still and clear.
For best results, let mulberry wine age for a year or two.